OMC Cobra 1986-1993 Lower Unit V4 2.3 3.0 L 1 YEAR WARRANTY

• Fully resealed!
• 1 Year Warranty in exchange for a spinning core
• Ready to install after oil is installed!

This lower unit was removed from a freshwater setup, is in excellent used condition, and is ready for installation. All you have to do is add oil! We took the time to professionally clean and inspect this item to give you confidence in your purchase. The unit spins and shifts smoothly with no binding and the propeller shaft in straight.  When drained of oil, the oil was clean and free of metal and water. The skeg has been ground a little however, it should not affect performance. It has been fully resealed and pressure checked.  Please refer to the photos to verify both what all is included in this listing and the condition that they are in.  

Driveshaft length: 6-3/8 
Driveshaft splines: 20 
Propeller shaft: 13 

Please note - we have drained this unit of all oil prior to shipping and oil will need to be added prior to use.

General Information

• Freshwater condition
• Pressure checked to 12 PSI minimum
• Shaft checked for straightness
• Shifts and spins smoothly
• Will need to add oil before use

This lower unit qualifies for a 1 year warranty.  The warranty is validated by your core.  In order to qualify for this, you must send in that core.  Both shafts must spin and it must be complete.  We will send a label for you to return your core in our box after receipt of the unit you’ve purchased.  If you do not have a spinning core, you may call in after your purchase and buy the 1 year warranty for 10% of the purchase price.  If you do not return a core or purchase a warranty, this unit will be sold with a 45 day warranty and nothing more or less.

Location: Southcentral Outboards, Altamont, Illinois

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!