NS70A2 Nissan Tohatsu 2002 & UP Lower Unit 20” 60 70 HP AS IS

• PRESSURE CHECKED!

• This unit spins and shifts smoothly without binding
• Prop shaft is bent
• When the oil was drained there were no signs of heavy metal
• Paint is a little banged up and there are holes pre-drilled in the cavitation plate in preparation for a planing fin
• From the top of the water pump to the end, the driveshaft measures approximately 19 3/8" long and has a 14/13 spline count.
• All of the splines are in great shape and the skeg is not cracked or broken.
• The prop shaft needs straightened or replaced
• Housing is cracking on the side of the bullet and would need to be replaced
• Please refer to the photos to verify what is included in this listing and the condition these parts are in prior to ordering
• This unit is being sold AS IS with no warranty and has been priced accordingly 

General Information

• Freshwater condition
• Impeller has NOT been changed
• No metal in oil
• Shafts checked for straightness
• Spins smoothly with no binding
• Will need to add oil before use

**Due to shipping restrictions, lower unit are shipped empty. Every lower unit requires new oil to be installed when you receive it.

Please note that we will not accept returns for this item if it is ordered incorrectly or if you change your mind. We guarantee this part to be in working condition if there are any issues, please contact us. However, please be sure this is the correct one for your motor prior to purchasing.

Location: Southcentral Outboards, Altamont, Illinois  

2002 & UP - 60 70 HP - 2-Stroke 3 Cylinder - NS70A2

We have provided this cross-reference with the resources we have available in regards to fitment. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us or a dealer prior to purchasing and we would be happy to help!