| Additional Info: |
- Fits 15 spline hub
- 13-3/4 Diameter
- 21 Pitch
- Aluminum or Stainless
- Describe Blades
- Standard or Counter Rotation
- Does not come with the hardware
This propeller is not sold with a hub. If you order this incorrectly or change your mind within 45 days, you may return it with a 20% restocking fee and shipping. You must contact us in order to facilitate that. You cannot open a return on ebay in this case.
Location: Southcentral Outboards, Altamont, Illinois
|
| Fits: |
EVINRUDE/JOHNSON OUTBOARDS: 100 HP-300 HP V-6/V-8 OUTBOARD - EVINRUDE/JOHNSON
- 15 Tooth Spline
- 100 HP V-4 Commercial 1984 & Newer, 115 HP V-4 '95 & Newer
- 120 HP V-4 1985, 130 HP V-4 1995 & Newer
- 140 HP V-4 (25"_ 1989-94, 140 HP V-4 1985
- 150 HP V-6 Commercial 1993 & Newer
- 150 HP V-6 1978 & Newer (including E-TEC)
- 155 HP V-6 Commercial 1978 & Newer
- 175 HP V-6 1977 & Newer (including E-TEC)
- 185 HP V-6 1984-85, 200 HP V-8 1991 & Newer (including E-TEC)
- 200 HP V-6 E-TEC
- 225 HP V-6 1986 & Newer, 250 HP V-8 1991 & Newer (including E-TEC)
- 250 HP V-6 E-TEC
- 250 HP HO V-6 E-TEC
- 275-300 HP V-8 Two Strokes 1986-95
- 300 HP V-6 E-TEC
- Hub Kit: Use Flo-Torq II hub kit #835265Q02 for 1991 and newer applications. Purchased Separately.
- Hub Kit: Use Flo-Torq II hub kit #835267Q1 for 1990 and older applications. Purchased Separately.
HONDA OUTBOARDS: 115 D, 135-250 HP - HONDA
- 15 Tooth Spline
- 115D, 135-150 HP 2004 & Newer
- 200-250 HP (4-Stroke) 2002 & Newer
- Hub Kit: Use Flo-Torq II attaching hardware kit #835278Q1. Purchased separately.
MERCURY/MARINER OUTBOARDS: 135-350 HP - MERCURY/MARINER
- 15 Tooth Spline
- 135 HP 1987 & Newer, 150 HP 1978 & Newer
- 175 HP 1978 & Newer, 200 HP 1978 & Newer
- 220 HP 1987-88, 225HP 1980 & Newer
- 225 HP SeaPro/Marathon All Years
- 250-350 HP 2 and 4-Stroke 1990 & NEwer
- Hub Kit: Use Flo-Torq II hub kit #835257Q1 125-350 HP 2 & 4-Stroke 1990 & Newer (For Verado 350 use hub kit #840389Q06)
- Hub Kit: Use Flo-Torq II attaching hardware kit #835257Q1. For Verado 4 Cyl. 135-200 HP use Flo-Torq II attaching hardware kit #835257Q10. Purchased Separately.
YAMAHA OUTBOARDS: 150-300 HP - YAMAHA
- 15 Tooth Spline
- 150 HP 1986 & Newer, F150 4-Stroke 2004 & Newer
- 175 HP 1984 & Newer
- 200 HP 1984 & Newer, F200 HP 4-Stroke 2002 & Newer
- 220 HP Special 1984-85
- 225 HP Excel 1987-88
- 225 HP 1986 & Newer, F225 HP 4-Stroke 2002 & Newer
- 250 HP 1990 & Newer (including VMAX), F250 HP 4-Stroke 2005 & Newer
- 300 HP 2003 & Newer, 300 HDPI 2004 & Newer
- 200-250 HP SHO 4-Stroke
- Hub Kit: Use Flo-Torq II attaching hardware kit #835271Q2. Use Flo-Torq II attaching hardware kit #8M0075402 with 200-250 HP SOH. Purchased Separately.
MERCRUISER STERNDRIVES: ALPHA ONE, MERCRUISER I
- MerCruiser I 120-190 HP
- Models 470, 485, 888, 898, 225S & 233
- Alpha One 1986 & Newer
- 2.5 Liter 120 HP 1986-89
- 3.0 Liter 125-140 HP 1986 & Newer
- 3.7 Liter 165-190 HP 1986-89
- Warning! Check adequate tip clearance with stainles and 4-blade aluminum props. If necessary, switch to a flat tab anode (#76214Q5) or high performance trin tab (#822777Q1) to permit clearance.
MERCRUISER STERNDRIVES: ALPHA ONE / BRAVO ONE
- MerCruiser 200-280 HP Thru 1985
- Models 228, 255, 260, & 280TRS
- Alpha One / Bravo One 1986 & Newer
- 4.3 Liter 155-250 HP 1986 & Newer
- 5.0 Liter 180-250 HP 1986 & Newer (including 262 Mag)
- Warning! Check adequate tip clearance with stainles and 4-blade aluminum props. If necessary, switch to high performance trim tab (#822777Q1) to allow adequate clearance.
MERCRUISER STERNDRIVES: ALPHA ONE / BRAVO ONE
- Model 330TRS
- 5.7 Liter 210-320 HP 1986 & Newer
- 6.2 Liter 320 HP 2001 & Newer
- 7.4 Liter 300-385 HP 1988 & Newer
- 8.1 Liter 375-425 HP 2001 & Newer
- 8.2 Liter 390-415 HP 1990 & Newer
- Including 350, 454, 496, & 502 Mag. & 320 EFI
- Add 2" of pitch to suggested size for single engine applications 385 HP & above
- Caution! Check for adequate blade tip clearance when installing stainless steel propellers. If necessary, switch to Mercury trim tab #822777Q1 to ensure adequate blade clearance.
SUZUKI OUTBOARDS: 150-300 HP - SUZUKI
- 15 Tooth Spline
- DT150/150S HP 1986 & Newer
- DT175 HP 1986-92
- DT200 HP 1986-2000
- DT225 HP 1990 & Newer
- DF150-DF300 All Year
- Hub Kit: Use Flo-Torq II attaching kit #835281Q1. Purchased Separately.
We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!
|
