Mercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTY

 
$1,100.00
International Shipping Quote
  • Brand: Mercury
  • Size: 135 150 HP
  • Color: Primed
  • Style: 2:1 Ratio - 8/15 splines - V6 - 25" Driveshaft
  • Condition: Used
  • Notes: Opened, Inspected & Tested!
  • SKU: 56006 LRU
  • Manufacturer Part Number: N/A
  • Country of Manufacture: United States
  • Motor & Engine Type: Mercury
  • Part Type: Motors, Engines & Components
  • Other Part Number: N/A
  • Surface Finish: Black Paint
  • Inventory Number: 56006 LRU
  • Website Category: Lower Units
  • Website Sub Category: Complete Lower Units
  • UPC: N/A
  • Shipping: $75.00
KEY POINTS:
  • 1 YEAR WARRANTY (W/valid core exchange)
  • RESEALED
  • PRESSURE CHECKED
  • NEW IMPELLER INSTALLED
Additional Info
  • This lower unit does have a 2:1 gear ratio and was removed from a freshwater engine.
  • This unit shifts and spins smoothly with no binding and the prop shaft is straight
  • The driveshaft splines are showing slight wear
  • The gears and clutch are in good condition
  • The oil was free and clean of water and heavy metal
  • The paint has been stripped and primed and has new paint.
  • This unit is fully resealed, pressure checked, and a new impeller installed.
  • This does not come with the propeller, or propeller hardware.
  • This will come exactly as pictured - please refer to the photos to verify what is included in this listing and the condition these parts are in prior to ordering
  • The unit has been drained of oil and this will need to be added prior to installation. 

We do not take returns on incorrectly ordered items. If you are unsure whether this is the correct lower unit and correct length driveshaft for your application please contact us and we will be happy to help you buy the correct product. This product is still covered by the mechanical warranty, offered in exchange for your core, that we have stated in the listing.

Driveshaft measures - 26 5/8" from top of water pump housing to top of driveshaft.
Driveshaft spline count - 8
Prop shaft spline count - 15

General Information

  • Freshwater condition
  • Pressure checked to 12 PSI minimum
  • New Impeller
  • Shafts checked for straightness
  • This has a 25" XL driveshaft

Criteria to validate your 1 year warranty:

  • Core must be of equal or greater value
  • Cannot be locked up - driveshaft must spin
  • Up to 30 days from the date of purchase to send in your core
  • Covers mechanical aspects ONLY
  • Warranty begins from date of purchase

You will receive two copies of the terms and conditions for the lower unit 1 year warranty. One copy MUST be signed and returned with your core. Without a returned signed copy, the 1 year warranty will not be valid. 

Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us and we would be happy to help!

We offer a 45-day return policy so you can purchase this item with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing.

If you purchase this item incorrectly or change your mind, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us.

Location: Southcentral Outboards, Altamont, Illinois

Fits:
1976-2005 - 135 150 HP - 2:1 Gear Ratio

If you have a V6 lower unit with a preload pin, it could only be used only from 1976-1988.  If you have a lower unit that does not have a preload pin, it can be used from 1976-2005.

Please note that this lower unit has a 2:1 gear ratio. These can be used on a 175 or 200 HP motors as well, but the propeller will need to be switched out to keep you within the reccomended RPM.

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!


Mercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTY
Mercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTYMercury 1976-2015 25" XL Lower Unit 2.0L 135 150 HP V6 2:1 Ratio 1 YEAR WARRANTY