- MSRP: $1247.00
- You Save: $1,083.00 (87%)
- Brand: Johnson Evinrude
- Size: 25 35 HP
- Color: Polished
- Style: 3 cylinder
- Condition: Seller Refurbished
- Notes: Polished & Restored to like new condition!
- SKU: 25287 CRK
- Manufacturer Part Number: 437034
- Country of Manufacture: United States
- Motor & Engine Type: Johnson Evinrude
- Part Type: Motors, Engines & Components
- Other Part Number: 0339156
- Surface Finish: Vapor Blasted
- Inventory Number: 25287 CRK
- Website Category: Powerhead
- Website Sub Category: Crankshafts
- UPC: N/A
| Part Number | 339156, and also replaces 437034 |
| Additional Info |
We put more time and attention to detail into crankshafts than anyone in our industry, period! After spending a great deal of time consulting with professional crank builders and repair shops, we believe that our process is second to none. The counterweights are glass-beaded, which relieves stress from the part as well as all of the old grease and grime. The journals are inspected and checked with a micrometer for runout. After a crankshaft has been accepted, the journals and bearing surfaces are micro-polished to like new condition. The splines are all cleaned out and when the crank is in like-new condition, it is treated with a protective corrosion inhibitor for storage. The standard in this industry for wear on a crankshaft is that anything more than .001 or 1/1000th of an inch is cause for rejection. The standard for our shop is .0005, which is ½ of 1/1000th. We have exceptionally strict standards at Southcentral Outboards because you put in far too much time and money in a rebuild to use some junk crank that some guy in his garage tore out of an engine and threw online to make a few dollars. *Please note that there are a couple of cheap aftermarket models of these and other cranks being peddled. This is not an aftermarket crank. This is an OEM crankshaft, built to OEM standards. It's not remanufactured. It's in original condition, with the exception that we put about an hour into it to polish out the journals, clean the splines and counterweights, and measure each of the tolerances. This is essentially in brand new condition at this point.Please note that we will not accept returns for this item. Please be absolutely sure this is the correct one for your motor prior to purchasing. Location: Southcentral Outboards, Altamont, Illinois |
| Fits: | 1996-2001 - 25 35 HP 3 cylinder We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help! |
