Bravo 1 Outdrive Lower unit C# 1656-8865-C21 Mercury 1988 & Older

• We have inspected the shafts on the unit and both the driveshaft and propeller shaft are straight.
• The driveshaft measures approximately 7-7/8" long and has 15 splines.
• The propeller shaft also has 15 splines.
• All the splines are in great shape and are not chipped or cracked.
• The unit does spin and shift smoohly just as it should.
• There are a couple of holes pre-drilled on the cavitation plate, please see pictures.
• Please note that this does not come with the trim tab, propeller, or the propeller hardware.
• This unit will come exactly as pictured.
• The unit has been drained of oil and will need to be readded prior to installation.
  

  Please note that we will not accept returns for this item if it is ordered incorrectly or if you change your mind. We guarantee this part to be in working condition.  If there are any issues, please contact us. However, please be absolutely sure this is the correct one for your motor prior to purchasing.

  Location: Southcentral Outboards, Altamont, Illinois
  

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!