1978 1979 - 1991 Johnson Evinrude 20" Lower Unit 85 88 90 100 110 115 140 HP V4

• 20 Inch Driveshaft 
• Single piece driveshaft 
• Fully resealed 
• Extended Warranty with exchange of a spinning core (see below for more info)

• Shifts and spins smoothly without binding
• Shafts checked for straightness
• Driveshaft splines show moderate wear (please see pictures)
• Gears & clutch are in good condition with light wear on the clutch surfaces 
• Freshwater Condition
• New Impeller installed
• Fully Resealed & Pressure checked to 12 PSI

Driveshaft splines: 20

Propeller shaft splines: 13

Driveshaft length from the top of the water pump to top of the shaft: 20-1/4"

Please add oil before use. This unit is shipped empty. 

This lower unit qualifies for a 1 year warranty.  The warranty is validated by your core.  In order to qualify for this, you must send in that core.  Both shafts must spin and it must be complete.  We will send a label for you to return your core in our box after receipt of the unit you’ve purchased.  If you do not have a spinning core, you may call in after your purchase and buy the 1 year warranty for 10% of the purchase price.  If you do not return a core or purchase a warranty, this unit will be sold with a 45 day warranty and nothing more or less.

Location: Southcentral Outboards, Altamont, Illinois 

1978-1991 V4 outboards.  Please note that from 1985-1991, Johnson and Evinrude made 2 different styles of V4.  The 60 degree, or crossflow engine ran through all of these years.  Starting in 1985, they also made a 90 degree Looper engine, which had a bigger gearcase.  The units will interchange, but you'd need a different prop in order to run this on your larger 90 degree engine.  This will, however, be an exact interchange for all of the 1978-1991 60 degree crossflow engines.

This unit does have a single-piece driveshaft. 

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!