- Brand: Mercury
- Size: 135 150 175 200 HP
- Color: Gray
- Style: 1.87: 1 Ratio - 8/15 splines - V6
- Condition: Pre-owned
- Notes: Opened, Inspected & Tested!
- SKU: 49186 LRU
- Manufacturer Part Number: N/A
- Country of Manufacture: United States
- Motor & Engine Type: Mercury
- Part Type: Motors, Engines & Components
- Other Part Number: N/A
- Surface Finish: Painted, Gray
- Inventory Number: 49186 LRU
- Website Category: Lower Units
- Website Sub Category: Complete Lower Units
- UPC: N/A
- Shipping: $75.00
KEY POINTS: |
*SHIFTS AND SPINS SMOOTHLY *1 YEAR WARRANTY *NEW IMPELLER |
| Additional Info | This lower unit is in excellent condition and is ready for your engine. This unit shifts and spins smoothly. The prop shaft is straight. When drained, the oil was free and clean of heavy metal. The gears and clutch are in good condition. The paint is a little banged up and the skeg is chipped on the end. This unit has been fully resealed, pressure checked, and a new impeller installed. From the top of the water pump, the driveshaft measures approximately 21-3/8" long and has 8 splines. The propeller shaft has 15 splines. The splines are not cracked or chipped. We cannot ship lower units with oil in them so this must be done prior to installation. Purchase with confidence! General Information
To obtain the 1 year mechanical warranty, you MUST send in your core lower unit. We will even pay to have your core shipped to us! Below is the criteria required to validate the warranty:
Upon receipt of your core, we will inspect the unit to determine if it meets the criteria to validate the 1 year warranty. We reserve the right to accept or reject any core at our discretion. If you have any questions or concerns, please do not hesitate to contact us. We offer a 45-day return policy so you can purchase this item with confidence. If you have any issues with the product, please reach out to us and we would be happy to help resolve any issue that may occur. Please be absolutely sure this is the correct one for your motor prior to purchasing. If you purchase this item incorrectly or change your mind, we will accept a return within 45 days however, we will charge our initial shipping cost and a 20% restocking fee. If you have any questions, please contact us. Location: Southcentral Outboards, Altamont, Illinois |
| Fits: | 1976-1988 - 175 200 HP - 1.87:1 Gear Ratio - 135 150 HP - 2.0:1 Gear ratio - therefore you will need to change your propeller Mercury V6’s originally used a preload pin from 1976-1988. Aftermarket replacements and 1989 & up V6 lower units did not. Therefore, if you have a V6 lower unit with a preload pin, it could only be used only from 1976-1988. If you have a lower unit that does not have a preload pin, it can be used from 1976-2005. Also, please note that this is the bigger bullet style housing with a 4.75" diameter. |
