1973 - 1975 Johnson Evinrude Long 20" Lower Unit 60 65 70 75 HP 1 YEAR WARRANTY

Key Points:

• 20 Inch Driveshaft  
• Fully resealed and pressure checked with new impeller installed
• Shift rod is slightly bent.  It should bend back into place okay.
• There was a chip out of the forward side of the cavitation plate and my guys took some of that off to clean it up.  Rather than leave it alone, they matched it by doing both sides.  We'll try to take some pretty careful pictures of the housing so you can see everything.  
• Paint is worn.  The white you see is probably someone's left over attempt to repaint.  There's no scum on the unit.  It's just worn off paint.
• Extended Warranty with exchange of a spinning core (see below for more info)

Additional Info

• Shifts and spins smoothly without binding
• Shafts checked for straightness
• Driveshaft splines show light wear
• Gears & clutch are in good condition with little to no wear
• Freshwater Condition
• New Impeller installed
• Fully Resealed & Pressure checked to 12 PSI

Driveshaft splines: 4

Propeller shaft splines: 13

Driveshaft length from the top of the water pump to top of the shaft: 18-5/8"

Please add oil before use. This unit is shipped empty.

This lower unit qualifies for a 1 year warranty.  The warranty is validated by your core.  In order to qualify for this, you must send in that core.  Both shafts must spin and it must be complete.  We will send a label for you to return your core in our box after receipt of the unit you’ve purchased.  If you do not have a spinning core, you may call in after your purchase and buy the 1 year warranty for 10% of the purchase price.  If you do not return a core or purchase a warranty, this unit will be sold with a 45 day warranty and nothing more or less.

Location: Southcentral Outboards, Altamont, Illinois

1973 - Mid-1975 - 60 65 70 75 HP - 3 cylinder

We have provided this cross-reference with the resources we have available in regards to fitment. This most likely will not fit every model for the years and horsepowers we have listed. We urge you to make sure this is the exact item you need by matching the part number to what is required for your motor. If you need help doing so, please contact us prior to purchasing and we would be happy to help!